Luminescent paint for metal
Scope of application
Description:
Acrylic luminescent paint accumulates light from any source and glows in the dark.
Charges 15-30 min. (depending on the brightness of the light), it only takes a couple of minutes to charge from UV light.
The afterglow time in the dark is 8-10 hours for three basic colors (classic green, classic light blue and classic blue).
The remaining 8 color options glow in the dark for 6-8 hours after each "charging" with light. The ability to accumulate and give off light is not lost over time.
The paint is designed specifically for painting cars and motorcycles, as well as other metal products.
Surface preparation: Clean the surface of old peeling and opaque coatings, remove dirt and dust. Degrease. Cover with white primer. Attention! The composition of the paint includes additives that settle at the bottom of the can. Stir the paint thoroughly before use (2-3 minutes) until a homogeneous mass is obtained. In the process of applying the paint must be additionally mixed. The paint is applied by brush, roller or dipping in 2-3 thin coats. When applying paint with a spray gun, nozzle size 1.4 - 1.5 mm, pressure - 3-4 bar, we recommend applying the second (intermediate layer) - 15 - 22 µm. Use hardeners containing xylene, for example #646. Drying time at +20°C and 50% relative humidity up to 4 hours. Consumption: in 1 layer 10-12 sq.m.\1l.
18 months from date of manufacture.
Store and transport in a hermetically sealed container at a temperature of 0 to 30°C, out of the reach of children. Keep away from sources of ignition and exposure to direct sunlight, heaters and moisture. When carrying out painting work in the premises, ventilation is necessary. Use rubber gloves and a respirator. Take empty containers for recycling. Wash working tools in solvent.