Paint for road markings and safety signs
Scope of application
Construction, repair
Decorative finishing of different surfaces
Security systems
Road markings
Description:
Acrylic luminescent paint accumulates light from any source and glows in the dark.
Charges 15-30 min. (depending on the brightness of the light), it only takes a couple of minutes to charge from UV light.
The afterglow time in the dark is 8-10 hours for three basic colors (classic green, classic blue and classic blue).
The remaining 8 color options glow in the dark for 6-8 hours after each "charging" with light. The ability to accumulate and give off light is not lost over time.
Light accumulative road marking paint designed for painting indoor and outdoor floor surfaces. And it is used for marking pedestrian areas, bicycle paths, as well as for marking on sports fields, etc.
Peculiarities
Increased strength
Fast drying
Weather resistance
Resistant to detergents
Mode of application
Surface preparation: Clean the surface, remove dirt and dust. Degrease. The paint is applied to a white substrate that serves as a reflector. Attention! The composition of the paint includes additives that settle at the bottom of the can. Stir the paint thoroughly before use (2-3 minutes) until a homogeneous mass is obtained. In the process of applying the paint must be additionally mixed. The paint is applied by brush, roller or dipping in 2-3 thin coats. When applying paint with a spray gun, nozzle size 1.4 - 1.5 mm, pressure - 3-4 bar, we recommend applying the second (intermediate layer) - 15 - 22 µm. Use hardeners containing xylene, for example #646. Drying time at +20°C and 50% relative humidity up to 4 hours. Consumption: in 1 layer 10-12 sq.m.\1l.
Shelf life
18 months from date of manufacture.
Storage conditions and precautions
Store and transport in a hermetically sealed container at a temperature of 0 to 30°C, out of the reach of children. Keep away from sources of ignition and exposure to direct sunlight, heaters and moisture. When carrying out painting work in the premises, ventilation is necessary. Use rubber gloves and a respirator. Take empty containers for recycling. Wash working tools in solvent.
Why us?
Certified Products
Wholesale and retail
We send product samples
We advise and train
We work all over the world