Paint for stone and concrete
Scope of application
Description:
Acrylic fluorescent paint for stone and concrete accumulates light from any source and glows in the dark.
Charges 15-30 min. (depending on the brightness of the light), it only takes a couple of minutes to charge from UV light.
The afterglow time in the dark is 8-10 hours for three basic colors (classic green, classic blue and classic blue). The remaining 8 color options glow in the dark for 6-8 hours after each "charging" with light.
The ability to accumulate and give off light is not lost over time.
Surface preparation: Clean the surface of old peeling and opaque coatings, remove dirt and dust. Degrease. Cover with white primer. Attention! The composition of the paint includes additives that settle at the bottom of the can. Stir the paint thoroughly before use (2-3 minutes) until a homogeneous mass is obtained. In the process of applying the paint must be additionally mixed. The paint is applied by brush, roller or dipping in 2-3 thin coats. When applying paint with a spray gun, nozzle size 1.4 - 1.5 mm, pressure - 3-4 bar, we recommend applying the second (intermediate layer) - 15 - 22 µm. Drying time at +20°C and 50% relative humidity about an hour. Consumption: in 1 layer 7-10 sq.m.\1l. Depends on the porosity of the surface.
18 months from date of manufacture.
Store and transport in a hermetically sealed container at a temperature of -20°С to +30°С, out of the reach of children. Not flammable, not explosive.